How should the dust removal skeleton be used in the low temperature season?
2018 04/12
The dust removal skeleton is used to avoid the excessive moisture of the material when it is switched on at low temperature. Pay attention to control feeding speed; Ring flow mill can increase the amount of powder to improve the internal wind temperature. Extend the stoping time as long as possible before stopping the mill, and early to the high moisture content of the mixing material stop, after the stop grinding, appropriately extend the time of the grinding air exhaust, and make the grinding body transfer.
As the most basic dust removal accessory, the dust removal skeleton needs to be taken seriously for its cleaning, which can greatly prolong its service life. The dust removal framework can show important role and value in use, and can be used in different industries and fields. The filling amount should be suitable to avoid affecting the ventilation area of the hollow shaft. It should be cleaned in time, and it is forbidden to mix materials such as iron slag in the mixing material to avoid blocking the slot.
To maintain the stability of ventilation in the mill at a good level; Once changed, still can be adjusted by the exhaust fan suction force to maintain the best ventilation rate, grinding, such as T factory ordered to grate seam wall partition storehouse board and discharge grate plate, stable ventilated area. Do a good job in production scheduling in continuous operation as far as possible when the big moisture content, reduce the grinding mill number and pause time; Try to avoid the low temperature in the middle of the night and morning, especially during the low temperature season.